Matte Additive
5,95 €
Flattening agent used for Multidose Clear Coat.
Depending on the dosage, you can achieve different finishes:
For a matte finish we recommend the dose 9:3:1:2
For a satin finish we recommend the dose 4:3:1:1,5
For a vintage finish we recommend the dose 2:3:1:1
Being the products Matte Additive : Gloss Clear : Activator : Thinner
For a matte finnish it is very important spraying the mix in thin layers, with at least 6 hours of difference between layers.
Description
GC-302. Gravity Colors Matte Additive.
DIRECTIONS:
- Mix additive with the Clear Coat in the correct dosage for the desired finish.
- For a matte finnish it is very important spraying the mix in thin layers, with at least 6 hours of difference between layers. We advise against spraying a thicker layer, as we do for Gloss Clear Coating.
- To not waste the products, use the Dosage Calculator here.
- Do not use near heat, sparks or open flame!
- Use in well ventilated area.
- Tighten cap securely after each use.
Additional information
| Weight | 84 g |
|---|
Why Gravity Colors?
